Make sure you get the right bandsaw for the cutting job in mind

If the cutting job that you have undertaken deems it necessary for you to cut precise curves, then it is highly recommended for you to make use of bandsaws.  If truth be told, the acquisition of a quality band saw is going to make it possible for you to do a whole lot more than just cut curves. However, with the many different types of band saws available these days, it is necessary for you to make sure that you purchase the right bandsaw for your particular cutting job.


The different band saws available these days
There are two different types of band saws that are available these days for structural fabrication. These include floor-standing cabinet models and shorter units that are meant for mounting over bench tops or dedicated stands. When it comes to cabinet models, these are specifically meant for professional use. However, the small units are best for home based woodworkers. Cabinet models are known to have larger motors, plenty of features and a very sturdy frame. This means that they are the best pick for consistent cutting jobs. However, it might also be possible for you to acquire professional results through smaller units.

When choosing a band saw, it is highly recommended for you to consider two main things. These are inclusive of the throat along with the depth of cut. For those who don’t know, the depth of cut of the saw is the distance between the upper blade guides and the table. A majority of the band saws that are available these days are marketed solely on the basis of this feature for it portrays the thick of stock that can be cut with the band saw. If you purchase a band saw that has a six-inch depth of cut, it is possible for you to acquire an optional riser as well so as to extend it to about twelve inches.

As for the throat, it is basically the distance between the vertical frame section of the saw body, and the blade.  Through this distance, it is easy to determine the width of cut that you can achieve using the band saw. For a free-standing cabinet bandsaw, the throat is typically over 12 to 14 inches.

Motor size
Another element for you to take into consideration is that of the motor size of the band saw you want for structural steel fabricators. A majority of home-level band saws come with a ¾ to 1 horsepower motor. On the other hand, professional ones are equipped with larger motors, all of which are known for their variable speeds. If you are a woodworker, then the variable speed element might not really concern you.

Added features
It is necessary for the bandsaw that you choose to have a steel, cast-iron or aluminum alloy table that has the potential to tilt to about 45-degrees for angled cuts. The table should be nearly 16-inches in terms of its length and width and should come with a miter track as well.

You may also like